PRODUCTS OFFERED

      WE CURRENTLY OFFER SIX DISTINCTLY DIFFERENT TYPES OF CONCRETE COATINGS. THE FOLLOWING IS A BRIEF DESCRIPTION OF EACH COATING AND SOME POSSIBLE USES FOE EACH COATING.
       

(1)     PIGMENTED ACRYLIC: THIS PROVIDES A ONE-COLOR COATING, MOSTLY USED ON GARAGE / CARPORT FLOORS AND BASEMENTS. THIS IS A SMOOTH TEXTURE. ACRYLICS DO NOT CHANGE THE TEXTURE OF THE SURFACE, ONLY COATS THE EXISTING SURFACE.

(2)     KNOCK DOWN: THIS COATING PROVIDES A VERY ATTRACTIVE ‘HIGH LOW’ SURFACE, THUS CHANGING THE TEXTURE OF THE SURFACE. THIS ONE COLOR COATING CAN BE TRIMMED WITH A TILE DESIGN OR A SINGLE COLOR ACCENT (OPTIONAL). MOST COMMONLY USED AROUND POOL DECKS WITH THE TRIM AROUND THE POOL. (SEE PICTURE GALLERY) WE HAVE ALSO USED THIS COATING ON PATIOS AND DRIVEWAYS.

(3)     SPRAY TEXTURE: VERY POPULAR ON DRIVEWAYS, PATIOS, WALKWAYS, AND POOL DECKS. WE USE THIS ON COMMERCIAL PROPERTIES ALSO. CHURCHES USE THIS COATING AS IT WORKS WELL ON HANDICAPPED RAMPS AS THE TEXTURE CAN BE ‘BEEFED UP’  TO PROVIDE VERY EFFECTIVE ANTI-SLIP SURFACE. THIS IS A TWO OR MORE LAYER SYSTEM. USING STENCILS, (OPTIONAL) SPRAY TEXTURES CAN BE MADE TO PROVIDE THE LOOK OF TILES, BRICK, COBBLESTONE, FLAGSTONE, OR CUSTOM DESIGNS SUCH AS CORPORATE LOGOS. THERE IS VIRTUALLY NO LIMIT TO THE DESIGNS THAT CAN BE CREATED WITH THIS TECHNIQUE.  

(4)     RUSTIC: THIS COATING HAS THE LOOK AND FEEL SIMILAR TO THAT OF NATURAL SLATE, ALTHOUGH ITS EFFECT  CAN BE ALTERED SOMEWHAT. IT MAY NOT BE SUITABLE FOR USE ON SURFACES SUCH AS THE PREVIOUSLY MENTIONED HANDICAPPED RAMP, WHERE A HIGHLY  TEXTURED SURFACE IS REQUIRED. THIS IS A LAYERED COATING AND CAN BE USED IN CUSTOM APPLICATIONS AS DESCRIBED ABOVE IN SPRAY TEXTURES.(#3)

(5)     CHEMICAL STAINS: THIS COATING IS USED ON TRAWLED CONCRETE FINISHES SUCH AS BASEMENTS OR GARAGE / CARPORTS. CHEMICAL STAINS ARE RAPIDLY BECOMING THE PREFERRED COATING FOR RETAIL STORES, MALLS, AND RESTAURANTS. EXTREMELY HIGH TRAFFIC AREAS BENEFIT FROM  THIS MARBLE LIKE COATING BECAUSE THE COLORS ARE PERMANENTLY ETCHED  INTO THE CONCRETE SURFACE WITH ACID AND SEALED WITH MULTIPLE CLEAR ACRYLIC LAYERS. CHEMICAL STAINS CAN BE DESIGNED INTO LOGOS OR ANY CUSTOM DESIGN.

(6)     POLYMER OVERLAYS: (Not offered in all locations.) THIS COATING CAN BE APPLIED OVER VIRTUALLY ANY CONCRETE SURFACE. A 3/8” LAYER OF CUSTOM ENGINEERED CONCRETE IS RAKED OVER THE EXISTING CONCRETE SURFACE. THE DESIRED PATTERN IS THEN STAMPED INTO THE LAYER. A POLYMER RESIN IS USED AS A BONDING AGENT. COLOR IS PROVIDED BY ONE OR MORE METHODS, TO COMPLEX TO DESCRIBE IN THIS TEXT. THE NEW SURFACE CAN ALSO BE CHEMICALLY STAINED AND / OR GROUTED TO OBTAIN CERTAIN EFFECTS.